What are the problems and solutions to the problems of the glue filling machine?

2024-01-13 14:32

Many customers are worried about the glue filling machine what problems, if the purchase of your glue filling machine problems do? Many mechanical equipment is not to ensure that all the time in the normal operation, we humans sometimes often catch a cold, if our equipment "cold", what should do!

 

In the daily use of our lives, there will be two kinds of glue filling machine "cold" problem, what should we do?

 

glue filling machine

 

1. glue out of uneven

 

When the junction box glue filling machine is used for production in the product glue dispensing process, if the glue filling equipment failure problems such as uneven glue dispensing amount occur, the production quality of product glue dispensing will be seriously affected. The reasons for uneven glue dispensing in the junction box glue filling machine are: the static mixing pipe is not fixed well, thus affecting the glue filling principle of the equipment and causing the glue filling equipment failure problem. If the static mixing pipe is damaged, it can be replaced and applied again.

 

Glue dispensing bubbles appear 2.

Glue bubble phenomenon is also one of the common problems of glue filling equipment in the process of product dispensing production. The main reason for the problem of glue adding bubble is that the junction box glue filling machine stirs the glue in the opposite direction when stirring the glue. The method is incorrect. The appearance of glue bubble affects the production quality of the product and will cause great problems to the production work. But if it is because of the static mixing tube leakage problem, will affect the junction box glue principle, affect the normal production quality. The solution is to adjust and set the glue stirring direction, check whether there is air leakage in the static mixing pipe, and avoid the problem of glue filling equipment failure affecting the glue filling principle of the junction box glue filling machine.

 

 

Buy glue filling machine to recognize the principle of their own purchase, small make up here to share a few points:

 

1. Glue: one-component glue filling machine is used for ordinary glue, double-liquid AB glue, PU glue filling machine is used for PU glue, and specific syringe is used for UV glue filling.

 

2. Glue filling process: semi-automatic glue filling (such as foot control) is used for ordinary glue filling, while desktop, three-axis, circle drawing and other automatic glue filling machines are used for positioning and marking. The automatic function of the glue dispenser is actually a subsidiary function. The glue filling machine plays a more important role in controlling the glue, and other functions can be realized by means of an automatic manipulator.

 

3. Work efficiency and environment: few products, no pursuit of efficiency, use manual glue; outdoor work, use glue. Ask to control the contest and use the machine. If automatic dispensing is required, a machine with automatic function shall be used.

 

4. Cost: There are various glue filling schemes. Not all glue filling machines are required, and not all automatic glue dispensing must be attached. From the cost considerations, if some kind of glue needs to be used too high-priced machines, you can consider replacing the glue. If the price of the automatic dispensing machine is too high, you can consider moving the product instead of filling the glue head.

 

This problem is actually in the purchase of Shenzhen Lake glue machine can be avoided, because the purchase of guaranteed equipment, so that you in the probability of a problem reduced by 90%, but remember the problem of the treatment method plus usually more maintenance of our equipment, so the method and principle of buying glue machine is very important!

Previous Page

The use of automatic glue machine pay attention to matters?

Solution to Abnormal Colloid Viscosity of Automatic Dispenser

Next Page

More News