NEWS

NEWS

News information

Glue machine should be how to choose?

Glue machine should be how to choose?

Choose the right glue filling machine equipment, do not buy expensive, only buy the right. According to their own needs, actual application scenarios, select equipment. Choosing the right glue filling machine needs to consider the following factors: glue filling size: Generally small and medium-sized products are used more. According to the size of the product and the size of the product filling glue, combined with the width of the table surface of the glue filling machine and the height of the glue filling mechanical arm to see if it meets the requirements of the product.

2024/01/13

How much vacuum degree of vacuum glue filling is appropriate? How much product can be poured

How much vacuum degree of vacuum glue filling is appropriate? How much product can be poured

How much vacuum degree of vacuum glue filling machine is suitable? When vacuum filling glue, the vacuum degree is generally required to reach about 10 ^-3~10 ^-4 Pa. The vacuum degree within this range can effectively prevent oxygen, moisture and other impurities in the air from entering the glue, thereby ensuring the bonding quality and bonding strength. If the vacuum degree is too high, it may cause adverse effects on the product, and the negative pressure may explode the product components. If it is too low, it may not meet the vacuum potting standard, which will affect the product quality. However, in actual operation, it is necessary to determine the appropriate vacuum degree according to the requirements of specific materials and glue. Standards should not be overly applied. Before the formal large-scale potting production, a small batch of vacuum pouring glue test should be carried out.

2024/01/13

How to solve the problem of air bubbles or cavities after vacuum glue filling?

How to solve the problem of air bubbles or cavities after vacuum glue filling?

Use a vacuum glue filling machine to fill glue for the product in a negative pressure vacuum state. Because the vacuum environment can promote the escape of gas in the glue. It can effectively reduce the bubbles in the glue, but it does not guarantee that there are no bubbles at all. Because even in a vacuum state, there are still tiny bubbles in the glue, and the size and number of these bubbles are difficult to fully control.

2024/01/13

The use of automatic glue machine pay attention to matters?

The use of automatic glue machine pay attention to matters?

With the rapid development of electronic industry technology and the requirements of enterprises for the automation of electronic products and other functions, the perforated elements used before can no longer meet the demand. The automatic glue dripping machine has solved this problem for many enterprises. Many people do not know much about how to use the full-automatic glue dripping machine correctly and what needs to be paid attention to when using the full-automatic glue dripping machine, so what do you need to pay attention to when using the full-automatic glue dripping machine?

2024/01/13

What are the problems and solutions to the problems of the glue filling machine?

What are the problems and solutions to the problems of the glue filling machine?

Glue bubble phenomenon is also one of the common problems of glue filling equipment in the process of product dispensing production. The main reason for the problem of glue adding bubble is that the junction box glue filling machine stirs the glue in the opposite direction when stirring the glue. The method is incorrect. The appearance of glue bubble affects the production quality of the product and will cause great problems to the production work. But if it is because of the static mixing tube leakage problem, will affect the junction box glue principle, affect the normal production quality. The solution is to adjust and set the glue stirring direction, check whether there is air leakage in the static mixing pipe, and avoid the problem of glue filling equipment failure affecting the glue filling principle of the junction box glue filling machine.

2024/01/13

Solution to Abnormal Colloid Viscosity of Automatic Dispenser

Solution to Abnormal Colloid Viscosity of Automatic Dispenser

The automatic dispensing machine has large glue viscosity and small glue point, and simple wire drawing phenomenon occurs. Self-dispensing machine has small glue viscosity and large glue point, which is prone to glue infiltration and dyeing. Therefore, it is very important to select the appropriate glue viscosity for self-dispensing machine! Pressure setting of pressure point of automatic glue press The setting of the dispensing pressure of the self-dispensing machine is very important. If the pressure is too high, the glue overflow phenomenon will be formed. If the pressure is too low, the leakage point or the dispensing will be discontinuous, resulting in low product qualification rate and low production efficiency. Colloid viscosity plays a vital role in packaging accuracy, packaging adhesion and overall quality of packaging. Therefore, colloid viscosity is an important parameter that needs to be adjusted in the packaging process of automatic dispensing machine.

2024/01/13

< 12 >